Đăng ngày 11-08-2016 Lúc 11:09'- 502 Lượt xem
Giá: 1 VND / 1 Cái
Veichi AC90 Căng thẳng Kiểm soát tần Inverter AC90 kiểm soát căng thẳng biến tần để đạt được kiểm soát căng thẳng liên tục thông qua việc điều chỉnh mô-men xoắn đầu ra và tự động tính toán đường kính con lăn. Không cần cài đặt cảm biến căng thẳng trong đó sử dụng thông tin phản hồi hiện tại vị trí bên ngoài và tín hiệu căng thẳng. Thậm chí nó có thể đạt được kiểm soát căng thẳng mà không cần cài đặt tốc độ phản hồi encoder trong hầu hết các ứng dụng. Nó sử dụng nhận dạng mô-men xoắn lợi thế tính với bù quán tính quay tự động, tĩnh và trượt lực ma sát chức năng để thực hiện một cách nhất quán đặc trưng căng thẳng cho chế biến nguyên liệu toàn bộ. Thông qua công nghệ nhận dạng con lăn thông minh với việc xác định chính xác cao, khả năng chống nhiễu mạnh Chế độ điều khiển tốc độ: Điều chỉnh tần số đầu ra của biến tần để thay đổi tốc độ của động cơ. Chế độ điều khiển torque: Điều chỉnh mô-men xoắn đầu ra động cơ, tốc độ xác định bởi điều kiện tải, nhưng sẽ hạn chế đến một tần số thiết lập. Người dùng có thể đặt trước giá trị căng thẳng để đạt được sự kiểm soát căng thẳng thông qua xây dựng đường kính cuộn tính toán. kiểm soát căng thẳng AC90 phù hợp với biến tần gió và thư giãn áp dụng splitter phim, in ấn, in ấn máy bào, máy đóng gói với hệ thống điều khiển đơn giản và dễ bảo trì. Nó có sẵn để xây dựng một hệ thống kiểm soát căng thẳng tốt hơn để thay thế cho động cơ mô-men xoắn, động cơ DC và kiểm soát căng thẳng hệ thống.
Một loạt các sự căng thẳng thiết lập các chế độ , các loại tính toán đường kính cuộn dây , bồi thường năng động khác nhau , mà làm cho biến tần AC90 hoàn toàn thay vì hệ thống căng thẳng truyền thống tạo thành với động cơ mô-men xoắn , động cơ DC và điều khiển sự căng thẳng . Làm cho hệ thống kiểm soát căng thẳng chính xác hơn và dễ dàng duy trì .
4. Rich expand function
5. Đặc điểm kỹ thuật:
Technical Specification | Items | Description |
Power Input | voltage, frequency | 1 PH, 50/60Hz, 3 phase 220V 50/60 |
Allowable fluctuations | Voltage:320V to 440V;Unbalance of Voltage:<3%; frequency±5% | |
Surge close current | less than rated current | |
Power Factor | ≥0.94( integrated DC reactor) | |
Efficiency | ≥96% | |
Power Output | Output Voltage | 3 Phase, 0~Input voltage, tolerance less than 5% in standard rating condition |
Frequency Control Range | G type: 0 to 320Hz | |
Output frequency accuracy | ±5% of maximum frequency | |
Overload Tolerance | G type model:150% of rated output current for 60 sec,180% of rated current for 10s,200% of rated current for 0.5s; | |
Key Control performance | Motor Control Mode | V/f Control, V/f Control with PG |
Control system | Optimized Space Vector PWM Modulation | |
Carrier frequency | 0.6~ 15kHz, Randomly-modulated carrier | |
Speed control range | OLV without PG with rated load: 1:100, | |
Stable speed control accuracy | OLV: less than 1% (25°C ±10°C), | |
Torque accuracy | OLV: less than 5% (25°C ±10°C), | |
Starting torque | OLV without PG control mode: 180% rated torque under 0.5Hz, | |
Torque response | OLV without PG control mode: ≤20ms | |
Frequency Accuracy | Digital inputs: maximum×±0.01% | |
Frequency Setting Resolution | Digital inputs: 0.01 Hz | |
Standard Function | Tension control | Tension setting calculation, tapered tension calculation |
Torque control | Torque setting, torque acceleration /deceleration, torque compensation , Speed limiter | |
Speed control | Frequency reference, acceleration/deceleration time, direction selection, speed limit, torque limit | |
Coil diameter | Linearity calculation, thickness calculation, time | |
DC Braking | Starting Frequency: 0.00 to 50.00Hz, | |
Auto current limit | Auto current limits during the running to protect over current trip frequent. | |
Motor Auto tuning | Stationary auto tuning, rotational auto tuning | |
AVR( Auto Voltage Regulation | automatic voltage regulation for keeping output voltage stable when fluctuation of grid | |
Auto energy saving running | Optimized the output voltage according to the load condition to achieve energy saving | |
Momentary Power Loss with no stop running | To achieve continuous running with regenerative energy and DC bus voltage regulation when momentary power loss | |
Standard Function | PID control, Carrier frequency adjustable, current limiter, Speed Search, Momentary Power Loss restart,16 Step Speed (max), 3-wire Sequence, Slip Compensation, Frequency Jump, Upper/lower Limits for Frequency Reference, DC Injection Braking at Start and Stop, Energy Saving Control, Modbus Comm RS485, Fault Restart, job function, Cooling Fan on/off Switch, timing stop, high pulse output, programmable auto running, weving frequency | |
Frequency Setting Methods | Keypad digital setting, potentiometer of keypad, analog voltage terminal VS1, analog voltage terminal VS2, analog current terminal AS, RS485 communication and multiple terminal, main and auxiliary composition setting. | |
Feedback Input Channel | voltage terminal VS1, VS2, current terminal AS, communication , and pulse input PUL | |
Running command channel | keypad given, external terminal given, communication given | |
Input command signal | Start, Stop, FEW/Reverse, Job, Multiple speed, free stop, Reset, Accel/Decel time, Frequency set point channel, External fault | |
Output signal | 2 Photo coupler relays: 2 (24 V, up to 50 mA) | |
Protection function | Overvoltage, under voltage, current limit, over current, overload, electric thermal relay, overheat, Stall prevention, parameter lock | |
keypad Display | LED Display | One line digit-segments LED display to monitor 1 running status |
Double line digit-segment display to monitor 1 running status | ||
Parameters copy | upload and download parameter code to achieve easy copy | |
Monitor Function | Output frequency, Frequency set point, Out current, Output voltage, motor speed, PID feedback value, PID given setting, IGBT module temperature, I/O terminal status. | |
Alarms | Overvoltage, under voltage, over current, short circuit, phase loss, over load, over heat, stall prevention, current limit, parameter lock damage, running status at present alarm, past trip alarm | |
Environment | Installation Site | Indoor, Altitude should less than 1000m, Free corrosive gases and direct sunlight |
Running Temperature, humidity | -10~+40°C ( wall mounting),-10~+45°C( enclosure) | |
Vibration | Less than 0.5g when frequency less than 20Hz | |
Storage Temperature | -25—+65°C | |
Installation mode | Wall-mounted mode, floor stand cabinet install | |
Protection Degree | IP20 | |
Cooling Method | Forced air-cooling |
6. Model and specification
Model | Max adaptive motor | Rated current |
AC90-T3-R75G | 0.75kW | 2.5A |
AC90-T3-1R5G | 1.5kW | 3.7A |
AC90-T3-2R2G | 2.2kW | 5A |
AC90-T3-004G | 4kW | 10A |
AC90-T3-5R5G | 5.5kW | 13A |
AC90-T3-7R5G | 7.5kW | 17A |
AC90-T3-011G | 11kW | 25A |
AC90-T3-015G | 15kW | 32 |
AC90-T3-18G | 18.5kW | 32A |
AC90-T3-22G | 22kW | 45A |
AC90-T3-30G | 30kW | 60A |
AC90-T3-37G | 37kW | 75A |
AC90-BT3-45G | 45kW | 90A |
AC90-T3-55G | 55kW | 110A |
AC90-T3-075G | 75kW | 150A |
AC90-T3-90G | 90kW | 180A |
CÔNG TY TNHH XNK TM ĐẠI KINH NAM |